• An Investigation into the Potential Use of TDR Measurement Systems to Accurately Assess the Moisture Content at the Center of Completed Earthen Walls 

  Goodhew, S; Fox, Matthew; Carfrae, J; Boutouil, M; Strieff, F (2022-06-09)
• 

  Smart Home Technologies to Facilitate Ageing-in-Place: Professionals Perception 

  Oladinrin, Olugbenga Timo; Mesthrige, JW; Ojo, LD; Alencastro, J; Rana, M (MDPI AG, 2023-04)

  An ageing population is a global phenomenon. Like other developed economies, Hong Kong Special Administrative Region (HKSAR), China, also faces a severe ageing problem. One initiative to enhance the safe living and ...
• 

  A scientometric analysis of global scientific literature on learning resources in higher education 

  Gomis, MKS; Oladinrin, Olugbenga Timo; Saini, M; Pathirage, C; Arif, M (Elsevier BVEngland, 2023-04)

  There is a significant increase in the literature on learning resources in Higher Education (HE) but very limited evidence of studies that have taken a global overview of the context, range, and emerging trends from the ...
• 

  Investigating the influence of quality management on building thermal performance 

  Alencastro, J; Fuertes, A; de Wilde, P (Emerald, 2023-03-28)

  Purpose Despite the number of quality management procedures being currently applied, construction defects in the domestic sector are acknowledged to contribute to the energy performance gap of buildings. This paper ...
• Earthen-based building: In-situ drying kinetics and shrinkage 

  Touati, K; Le Guern, M; El Mendili, Y; Azil, A; Streiff, F; Carfrae, J; Fox, Matthew; Goodhew, Steve; Boutouil, M (Elsevier BV, 2023-03-10)

  Present work focuses on the study of drying and shrinkage kinetics in cob and light earth layers constituting a hybrid walling system. In-situ measurements were performed on the walls of a CobBauge prototype building under ...
• 

  3D printing system for earth-based construction: Case study of cob 

  Gomaa, M; Jabi, W; Veliz Reyes, Alejandro; Soebarto, V (Elsevier BV, 2021-04)

  Despite the dramatic development in digital manufacturing technologies in the recent years, 3D printing of earth materials, such as cob, still presents several challenges to the market-available 3D printing systems. This ...
• Spatialization of oppression 

  Bobic, Nikolina; Haghighi, Farzaneh (Routledge, 2022-10-10)
• 

  <i>Queer Psycho</i> and the <i>He Circus</i>: Applying Queering, Magic, and More-than-Human Theories to Immersive Visual Story Worlds as an Antidote to Late Capitalism 

  Dare, E; Yamada-Rice, Dylan (MIT Press, 2023-03-27)

  <jats:title>Abstract</jats:title> <jats:p>Two immersive visual story worlds (IVS), Queer Psycho and HE Circus, are at the center of this article, one made by each of us. Individually we found our works ...
• 

  An Evaluation of the Environmental Impact Assessment Process in Iraq 

  Al-Fatlawi, S; Ibadi, M; Goodhew, Steve; Pan, W (International Information and Engineering Technology Association, 2022-11-30)

  <jats:p>Environmental impact assessment (EIA) is becoming more prevalent. However, compared to many jurisdictions in developed countries, the Middle East countries, including Iraq, have been relatively late in introducing ...
• 

  Effect of Indoor Environment on Occupant Air Comfort and Productivity in Office Buildings: A Response Surface Analysis Approach 

  Kaushik, AK; Arif, M; Syal, MMG; Rana, MQ; Oladinrin, Olugbenga Timo; Sharif, AA; Alshdiefat, AS (MDPI AG, 2022-11-25)

  <jats:p>Indoor air quality is a significant factor influencing occupant comfort, health and productivity. Indoor air comfort and its relationship to occupant comfort and productivity are widely documented. Statistical ...

View more